| | DWX-15 | DWX-15PD |
|---|
Applied voltage/applied steps:
*With 1 K Ω load | 1000 V - 15000 V
(200 V steps) |
|---|
| Test impedance range | 50μH or higher |
|---|
| Sampling speed/memory | 8bit／10nano-sec.（100MHz） / 8192-Byte |
|---|
| Sampling ranges （WIDTH） | -4、-3、-2、-1、0、1、2、3、4、5
10 ranges (0 is compatible with the DW Series) |
|---|
| Test input circuit (Impedance) | Resistance division (5MΩ) |
|---|
Screen display,
waveform display range | 640 x 460 (VGA), 8.4-inch TFT color liquid crystal, 4-color display
512 x 256 |
|---|
| Judgment method | Comparison of master waveform with test waveform Judgment based on comparison of waveform area, waveform differential area and discharge quantity Winding insulation dielectric breakdown voltage test function |
|---|
| Master waveform memory capacity | Body expansion | 196 types (14 types/14 pages)
700 types with Compact Flash Memory (14 types/50 pages) |
|---|
| Microwave sensor antenna | None | Partial discharge electromagnetic sensing by narrow bandwidth flat batch antenna |
|---|
| Detection range | None | It is recommended that a distance of 30 cm be allowed from the test piece to the antenna when the device is installed. |
|---|
Antenna dimensions/Length of cable between antenna and body | None | W = 80 mm, H = 80 MM, D = 10 mm, cable length = 2 m |
|---|
| External interface | Parallel I/O (Start, reset, OK, NG, Busy, mater switching, etc.)
RS-232C (Test control, test data, etc.)
Printer board (Hard screen copies, etc.)
Ethernet adapter (optional) |
|---|
| Accessories | 15-M test cable: 1, power supply cable (with 3P adapter)
Compact Flash Memory: 1, parallel I/O connector: 1
User’s manual, test result sheets: 1 set |
|---|
| Usage conditions | 0℃ - 40℃, power supply voltage: 100 V 240 V ± 10% (Shipping configuration setting) |
|---|
External dimensions
(Not including carrying handle)
・Weight
| W=364 x 517mm
H=517mm |
|---|
