¡¼Software¡½ ¡¼Manual¡½ ¡¼Firmware¡½ ¡¼64Driver¡½
2.Accessories:
3.Other Pictures:
4. Features£º
• 200/100/60MHz bandwidths
•1GSa/s Real Time sample rate
• Large (7.0-inch) color display,WVGA(800x480)
• Record length up to 2M
• Trigger mode: edge/pulse width/line selectable video/slop/overtime etc.
• USB host and device connectivity, standard
• Multiple automatic measurements
• Four math functions, including FFTs standard
• Provides software for PC real-time analysis
5.Hardware Specification:
5.Hardware Specification:
Model |
DSO5202BMV |
DSO5102BMV |
DSO5062BMV |
Bandwidth |
200MHz |
100MHz |
60MHz |
Real-time Sample Rate |
1GSa/s |
Equivalent Sample Rate |
25GSa/s |
Record Length(Sample Points) |
Single-channel: Maximum 2M; Dual-channel:Maximum 1M (4K,16K,40K optional) |
SEC/DIV Range |
4nS/div-40S/div (in a 2, 4, 8 sequence) |
Delay Time Accuracy |
500ps |
Vertical |
A/D Converter |
8-bit resolution, each channel sampled simultaneously |
VOLTS/DIV Range |
2mV/div¢¦5V/div at input BNC |
Position Range |
¡¾50V(5V/div),¡¾40V(2V/div¢¦500mV/div),2V(200mV/div¢¦50mV/div)¡¾400mV(20mV/div¢¦2mV/div) |
Rise Time at BNC |
¡Â1.7ns |
¡Â3.5ns |
¡Â5.8ns |
DC Gain Accuracy |
¡¾4% for Sample or Average acquisition mode, 5mV/div to 2mV/div ¡¾3% for Sample or Average acquisition mode, 5V/div to 10mV/div |
Trigger |
Trigger Sensitivity (Edge Trigger Type) |
DC: CH1/CH2(Typical) 1div from DC to 10MHz;1.5div from 10MHz to Full EXT£¨Typical£© 200mV from DC to 40MHz EXT/5£¨Typical£© 1V from DC to 40MHz AC: Attenuates signals below 10Hz
HF Reject: Attenuates signals above 80kHz
LF Reject: Attenuates signals below 150kHz
Noise Reject: Reduces trigger sensitivity |
Trigger Level Range |
CH1,CH2: ¡¾8 divisions from center of screen EXT: ¡¾1.2V EXT/5: ¡¾6V |
Trigger Level Accuracy, typical (Accuracy is for signals having rise and fall times ¡Ã20ns) |
CH1,CH2: ¡¾(0.3div¡¿V/div) (within ¡¾4 divisions from center of screen) EXT: ¡¾(6% of setting + 40mV) EXT/5: ¡¾(6% of setting + 200mV) |
Holdoff Range |
100ns-10s |
Trigger Type |
Edge |
Trigger on the rising or falling edge |
Pulse Width |
Trigger (when >,<,=,¡Á) on positive or negative pulses Pulse Width Range: 20ns-10s |
Video |
Trigger on an NTSC, PAL, or SECAM standard video signal Line Range: 1-525 (NTSC), 1-625 (PAL/SECAM) |
Slope |
Trigger (when >,<,=,¡Á) on a positive or negative slope Set Time: 20ns–10s |
Overtime |
from the rising or falling edge Set Time: 20-10s |
Alternate |
Internal trigger on edge, pulse width, video or slope |
Measurement |
Cursors |
Manual: The difference between voltage cursors ¡âV; the difference between time cursors ¡âT; 1/¡âT calculated by Hz. Tracing: The voltage and time at a waveform point |
Automatic(32) |
Frequency, Period, Mean, Pk-Pk, Cycli RMS, Minimum, Maximum, Rise time, Fall Time, +Pulse Width, -Pulse Width, Delay1-2Rise, Delay1-2Fall, +Duty, -Duty, Vbase, Vtop, Vmid, Vamp, Overshoot, Preshoot, Preiod Mean, Preiod RMS, FOVShoot, RPREShoot, BWIDTH¡¢FRF¡¢FFR¡¢LRR¡¢LRF¡¢LFR¡¢LFF |
Display |
Type |
Right angle 7"TFT 16-digit color LCD |
Resolution |
800*480 dots |
Contrast |
16 gears, with the progress bar to show adjustment |
Interface |
USB host and USB slave |
Power Supply |
Voltage |
100-120VACRMS(¡¾10%)£¬45Hz to 440Hz£¬CAT¥± 120-240VACRMS(¡¾10%)£¬45Hz to 66Hz£¬CAT¥± |
Power |
<30W |
Fuse |
2A, T rating, 250V |
Mechanical |
Size |
Length: 313mm Width: 108mm Height: 142mm |
Weight |
2.08KG (exclusive of packing and accessories) |