¡¼Software¡½ ¡¼Manual¡½ ¡¼Firmware¡½ ¡¼64Driver¡½
2.Accessories:
3.Other Pictures:
4. Features£º
• 200/100/60MHz bandwidths
•1GSa/s Real Time sample rate
• Large (7.0-inch) color display,WVGA(800x480)
• Record length up to 2M
• Trigger mode: edge/pulse width/line selectable video/slop/overtime etc.
• USB host and device connectivity, standard
• Multiple automatic measurements
• Four math functions, including FFTs standard
• Provides software for PC real-time analysis
5.Hardware Specification:
Model
|
DSO5202BMV
|
DSO5102BMV
|
DSO5062BMV
|
Bandwidth
|
200MHz
|
100MHz
|
60MHz
|
Real-time Sample Rate
|
1GSa/s
|
Equivalent Sample Rate
|
25GSa/s
|
Record Length(Sample Points)
|
Single-channel: Maximum 2M; Dual-channel:Maximum 1M (4K,16K,40K optional)
|
SEC/DIV Range
|
4nS/div-40S/div (in a 2, 4, 8 sequence)
|
Delay Time Accuracy
|
500ps
|
Vertical
|
A/D Converter
|
8-bit resolution, each channel sampled simultaneously
|
VOLTS/DIV Range
|
2mV/div¢¦5V/div at input BNC
|
Position Range
|
¡¾50V(5V/div),¡¾40V(2V/div¢¦500mV/div),2V(200mV/div¢¦50mV/div)¡¾400mV(20mV/div¢¦2mV/div)
|
Rise Time at BNC
|
¡Â1.7ns
|
¡Â3.5ns
|
¡Â5.8ns
|
DC Gain Accuracy
|
¡¾4% for Sample or Average acquisition mode, 5mV/div to 2mV/div ¡¾3% for Sample or Average acquisition mode, 5V/div to 10mV/div
|
Trigger
|
Trigger Sensitivity (Edge Trigger Type)
|
DC: CH1/CH2(Typical) 1div from DC to 10MHz;1.5div from 10MHz to Full EXT£¨Typical£© 200mV from DC to 40MHz EXT/5£¨Typical£© 1V from DC to 40MHz AC: Attenuates signals below 10Hz
HF Reject: Attenuates signals above 80kHz
LF Reject: Attenuates signals below 150kHz
Noise Reject: Reduces trigger sensitivity
|
Trigger Level Range
|
CH1,CH2: ¡¾8 divisions from center of screen EXT: ¡¾1.2V EXT/5: ¡¾6V
|
Trigger Level Accuracy, typical (Accuracy is for signals having rise and fall times ¡Ã20ns)
|
CH1,CH2: ¡¾(0.3div¡¿V/div) (within ¡¾4 divisions from center of screen) EXT: ¡¾(6% of setting + 40mV) EXT/5: ¡¾(6% of setting + 200mV)
|
Holdoff Range
|
100ns-10s
|
Trigger Type
|
Edge
|
Trigger on the rising or falling edge
|
Pulse Width
|
Trigger (when >,<,=,¡Á) on positive or negative pulses Pulse Width Range: 20ns-10s
|
Video
|
Trigger on an NTSC, PAL, or SECAM standard video signal Line Range: 1-525 (NTSC), 1-625 (PAL/SECAM)
|
Slope
|
Trigger (when >,<,=,¡Á) on a positive or negative slope Set Time: 20ns–10s
|
Overtime
|
from the rising or falling edge Set Time: 20-10s
|
Alternate
|
Internal trigger on edge, pulse width, video or slope
|
Measurement
|
Cursors
|
Manual: The difference between voltage cursors ¡âV; the difference between time cursors ¡âT; 1/¡âT calculated by Hz. Tracing: The voltage and time at a waveform point
|
Automatic(32)
|
Frequency, Period, Mean, Pk-Pk, Cycli RMS, Minimum, Maximum, Rise time, Fall Time, +Pulse Width, -Pulse Width, Delay1-2Rise, Delay1-2Fall, +Duty, -Duty, Vbase, Vtop, Vmid, Vamp, Overshoot, Preshoot, Preiod Mean, Preiod RMS, FOVShoot, RPREShoot, BWIDTH¡¢FRF¡¢FFR¡¢LRR¡¢LRF¡¢LFR¡¢LFF
|
Display
|
Type
|
Right angle 7"TFT 16-digit color LCD
|
Resolution
|
800*480 dots
|
Contrast
|
16 gears, with the progress bar to show adjustment
|
Interface
|
USB host and USB slave
|
Power Supply
|
Voltage
|
100-120VACRMS(¡¾10%)£¬45Hz to 440Hz£¬CAT¥± 120-240VACRMS(¡¾10%)£¬45Hz to 66Hz£¬CAT¥±
|
Power
|
<30W
|
Fuse
|
2A, T rating, 250V
|
Mechanical
|
Size
|
Length: 313mm Width: 108mm Height: 142mm
|
Weight
|
2.08KG (exclusive of packing and accessories)
|