|
특징 (Features)
l GRS-6052A: DC-50MHz 대역폭,
100MSa/s,2KW/CH＊2
GRS-6032A: DC-30MHz 대역폭,
100MSa/s, 2KW/CH*2
l 200MSa/s 실시간 샘플링 속도
l 획득모드 : 피크 탐지,Envelop,지속
l 0~10div의 Pre 트리거 주파수
l 100s/div의 롤 모드
l 10개의 파형 저장/ Recall 메모리(REFO_REF9)
l 평균 기능(2~256)
l ON/OFF 스무딩 기능
l 10ns/div 최대 Sweep 속도
l ALT-MAG 기능 (*5,*10*20)
l 커서 리드아웃 기능 : △V, △T, 1/ △T
l 10개의 패널 설정 저장 / Recall 기능 (M0~M9)
l VERT 모드 트리거링
l RS-232C 인터페이스
상세설명
(Description)
 |
|
The GRS-6000A Series is a Real-Time/Digital Storage Oscilloscope, which provides both analog and digital storage features in one product. As original signals correctly represent and quickly update, the GRS-6000A Series allows users simultaneously to savie the waveform. With Equivalent Time Sampling at 500MSa/s, the GRS-6000A Series are capable of reconstructing repetitive waveforms up to 50MHz/30MHz in an accurate and detailed fashion. The waveform storage could be done just by pressing the RUN-STOP button, or through the Single Trigger mode which captures single-shot events. 10 Reference Waveforms can be saved and recalled for waveforms comparison. Numerous functions, such as Average, Pre-Trigger, Roll mode, Peak Detect, Envelop, Persistence, and X-Y mode, are available to meet various measurement applications. The RS-232C Interface and the free Remote Control Software enable monitoring, remote controlling, and storing waveforms in PC. |
|
| ANALOG + DIGITAL STORAGE |
| GRS-6000A Series Real-Time digital storage oscilloscope provides both analog and digital storage features in one product. It is extremely useful for applications requiring real time measurements (analog mode) and waveform storage functions (digital mode) at the same time. With a maximum 500MSa/s equivalent time sample rate, the GRS-6000A Series is able to accurately reconstruct waveforms up to 50MHz (GRS-6052A) and 30MHz (GRS-6032A). |
|
| DIGITAL STORAGE |
|
WhenRUN STOP button is pressed or Single Trigger mode is used, waveforms can be conveniently captured. Up to 10 reference waveforms can be saved for waveform comparison. With proven analog technology, functions, such as Average, Pre-Trigger, Roll mode, and X-Y mode, offer the flexibility of digital features. |
 |
GRS-6000A Series provides a pre-trigger function, which allows you to observe pre-triggered waveforms up to 10 divisions ahead of the trigger point. |
 |
The low-speed transient events from an input signal can be easily seen under the ROLL Mode. The waveform will roll on from right to left to show input signal continuously with a roll time of up to 100s/division. |
 |
With ALT-MAG function, you can expand waveforms by 5, 10 or 20 times for detailed waveform observation. Both the original waveform and expanded waveform can be shown on the screen simultaneously. |
|
| RS-232C AND REMOTE CONTROL SOFTWARE |
 |
| When remote control software through the RS-232C interface is active, waveforms on the oscilloscope screen can be displayed and updated on a PC screen. The graphic user interface provides an easy platform for remote control. All waveform data can be converted into BMP, PCX, TIFF, PNG, or JPEG files for documentation and analysis |
사양
(Specification)
|
GRS-6052A |
GRS-6032A |
| CRT |
| Type and Acceleration |
6-inch CRT, 10kV |
6-inch CRT, 2kV |
| Illumination |
Front panel control |
| Z-axis Input |
Sensitivity : at least 5V
Polarity : positive going input decreases intensity
Max. input voltage:30V(DC+ACpeak) |
| Input Impedance : approx. 33kΩ |
Input Impedance : approx. 47kΩ |
| VERTICAL SYSTEM |
| Deflection Coefficient and Accuracy |
1mV ~ 2mV/div ±5%,
5mV ~ 20V/div ±3%,
14 steps in 1-2-5 sequence |
| Variable Continuity |
2.5 : 1 ~ min. 50V/div |
| Bandwidth (-3dB) |
1mV ~ 2mV/div: DC~7MHz
5mV ~ 20V/div: DC~50MHz |
1mV ~ 2mV/div: DC~7MHz
5mV ~ 20V/div: DC~30MHz |
| Vertical Mode |
CH1, CH2, DUAL (ALT or CHOP) |
| Chopper Frequency |
Approx. 250kHz |
| Sum or Difference |
CH1+CH2, CH1-CH2 |
| Invert |
CH2 |
| Input Impedance |
1MΩ ±2%//approx. 25pF |
| Input Coupling |
AC, DC, GND |
| Input Voltage |
Max. 400V(DC+ACpeak) |
| HORIZONTAL SYSTEM |
| Sweep Time |
0.2μs/div ~ 0.5s/div, 20 steps |
| Variable Continuity |
2.5 : 1 up to 1.25s/div (uncal.) |
| Accuracy |
±3%, ±5% at x5/ x10MAG. ±8% at x 20MAG |
| Sweep Magnification |
x5, x10, x20 |
| Max. Sweep Time |
20ns/div (10ns/div uncal) |
50ns/div (10ns~40ns/div uncal) |
| ALT-MAG Function |
Yes |
| HOLD-OFF Time |
Variable |
| TRIGGER |
| Trigger Mode |
AUTO, NORM, TV |
| Trigger Source |
VERT, CH1, CH2, LINE, EXT |
| Trigger Coupling |
AC, HFR, LFR |
| Trigger Slope |
“+”or“ - ”polarity |
| ALT Trigger |
Yes |
| Indicator Trigger LED |
Yes |
| TV Sync. Separator |
TV-V“-”, TV-H“ - ” |
Trigger Sensitivity
|
|
GRS-6052A |
20Hz~5MHz |
5MHz~40MHz |
40Hz~50MHz |
|
GRS-6032A |
20Hz~2MHz |
2MHz~20MHz |
20Hz~30MHz |
|
CH1, CH2 |
0.5div |
1.5div |
2.0div |
|
Vert-Mode |
2.0div |
3.0div |
3.5div |
|
EXT |
200mV |
800mV |
1V | TV sync. pulse more than 1 div or 200mV (EXT) |
External Trigger Input
|
Input impedance :Approx. 1MΩ//25pF (AC coupling)
Max. input voltage : 400V (DC + ACpeak) |
| X-Y OPERATION |
| Input |
X-axis : CH1 ; Y-axis : CH2 |
| Sensitivity |
1mV/div ~ 20V/div |
| Bandwidth |
X-axis : DC ~ 500kHz (-3dB) |
| X-Y Phase Shift |
<3° from DC ~ 50kHz |
| DIGITAL STORAGE |
| Acquisition Digitizer |
8 bit ADC x 2 |
Max. Sampling Rate
|
500MSa/s for equivalent time sampling
100MSa/s for normal sampling |
| Storage Bandwidth |
Single shot: DC ~ 25MHz
Repetitive: DC ~50MHz |
Single shot: DC ~ 25MHz
Repetitive: DC ~30MHz |
| Dynamic Range |
±5div |
| Memory Length- Acquisition Memory |
2k words/CH x 2, 1k words/CH(equivalent) |
| Memory Length- Save REF Memory |
1k words/CH x 10 with back-up memory (REF0~REF9) |
| Memory Length- Display Memory |
1k words/CH x 4 waveform(max.) |
| Sweep Time |
Equivalent: 0.2μs/div ~ 0.5μs/div
Normal Sample: 1μs/div ~ 0.1s/div
Roll: 0.2s/div ~ 100s/div |
| Sweep Magnification |
x 5, x 10, x 20 |
| Max.Sweep Time |
10ns/div |
| MAG Interpolation |
DOTS, LINEAR |
| ALT-MAG Function |
Yes |
| Acquire Mode |
Sample, peak detect(>25ns), Envelop. Persist, Average(2~256) |
| Operation Mode |
Auto, Norm, Single, Single-roll, Roll, X-Y, Run/Stop |
| Smoothing Function |
Dot joint ON/OFF selectable |
| Pre-Trigger |
Pre-trigger 0 ~10div in 0.02div steps |
| X-Y Operation |
X-axis: CH1 Y-axis: CH2 |
| Storage Bandwidth |
DC~50MHz(-3dB) |
| Display Resolution |
H: 100points/div; V: 25points/div;
X-Y: 25 x 25 points/div |
| SAVE/ RECALL |
| Panel Setting |
10 sets(M0 ~M9) |
| Waveform |
10 sets(REF0~REF9) |
| READOUT & CURSOR |
| Cursor Measurement |
ΔV, ΔT, 1/ ΔT |
| Readout Intensity |
Adjustable |
| OUTPUT SIGNAL |
| CH1 Signal Output |
Voltage : approx. 20mV/div (with 50Ω terminated)
Bandwidth : 50Hz ~ 5MHz |
Calibrator Output
|
Voltage : 0.5V±3%
Frequency : approx. 1kHz, square wave |
| INTERFACE |
|
RS-232C |
| POWER SOURCE |
|
AC 100V/120V/230V±10%, 50/60Hz |
| DIMENSIONS & WEIGHT |
|
275(W) x 130(H) x 370(D) mm; Approx. 8.5kg |
|
