Keytek 587 pule 중고 SURGE GENERATOR

:::현재위치 HOME ▶ 중고제품 ▶ EMC EMI 관련기기(임펄스노이즈/써지제너레이터/정전기발생기) ▶ Surge Generat / Surge Comparison Tester (권선 절연 시험기) ▶ Keytek 587 pule 중고 SURGE GENERATOR

브랜드


	Surge Generator Selectable surges for: Keytek 587 Pule Short branch circuits - 1.2 x 50μs impulse, to 6kV OCV, 8 x 20μs impulse to > 3kA SCI (stored energy, 216 joules) - .5μs/100 kHz ring wave (damped cosine): to 6kV OCV, 500A SCI (stored energy, 7.2 joules) Long branch circuits - .5μs/100kHz ring wave: to 6kV OCV, 200A SCI (stored energy, 7.2 joules) Switch-selectable polarity Meter to set peak output surge Floating synch output just prior to surge Full interlock system prevents surging unless all interlocks (including external) are closed. Includes: 1. Model : Keytek 587 pule Surge Generator mainframe 2. Model P1 .5μs/100 kHz ring wave plug-in Surge Network 6kV, 0.5μs/100 kHz ring wave; 200A and 500A Q ~ 3 and Q ~ 10 IEEE Std. 587-1980 (Cat. A plus first half of Cat. B); UL943, 217, 268 3. Model P3 1.2 x 50μs impulse plug-in Surge Network 1.2 x 50μs, 6kV 8 x 20μs, ~ 3kA IEEE Std. 587-1980 (second half of Cat. B); IEC 664 4. Model F31 Surge Coupler/Filter Selectable surge coupling modes: Normal mode: line 2 to line 1 All three common modes: line 1 to ground line 2 to ground lines 1 and 2 to ground Power line: 0-277 V, 50-60 Hz 0-120 V dc To 10A continuous, 15A intermittent * OCV = open circuit voltage * SCI = short circuit current Please contact us for more information on the Keytek 587pule Surge Generator Includes front-panel switching for surge polarity and test waveform, digital display of peak delivered open-circuit surge voltage and remote control feature. Also includes a line coupler-fitter for surging powered equipment, front-panel switching for normal mode/common mode selection and 4-wire output monitoring for oscilloscope display of delivered surge waves. Includes PLUS plug-in, modular surge network construction to permit use of different surge networks. Allows surge testing not only to IEEE 587 and IEC 664 but also to CCITT and UL1449 surge specifications and to other standards as they are developed. The Model 587-Plus ® offers the best of both worlds: economy, plus the broad versatility that results from modular design and construction. Pictured with S1/S3 Surge Network: Rotary switch selection of the Bi-Wave (the 1.2x50 6KV open-circuit, 8x20 3 KA short-circuit wave of ANSI C62 .41 category B) plus Rotary switch selection of the two CCITT waves (10x700, 100x700), plus an additional, 0.5x700 wave. Rotary switch selection of output damping resistor: 0, 2.5, 25 ohms.