|
MAIN |
| Output Waveforms |
Sine, Square, Triangle, Ramp, Pulse, AM, FM, Sweep, Trigger, Gate or Burst |
| Frequency Range |
10mHz~15MHz in 8 frequency range(auto switch) |
| Frequency Resolution |
15MHz~150kHz(100Hz)
1.5MHz~15kHz(10Hz)
150kHz~1.5kHz(1Hz)
15kHz~150Hz(0.1Hz)
1.5kHz~15Hz(10mHz)
150Hz~1.5Hz(10mHz)
15Hz~0.15Hz(10mHz)
1.5Hz~0.01Hz(10mHz) |
| Frequency Accuracy |
0.02% ±5 count |
| Output Impedance |
50Ω±10% |
| Amplitude Range |
10.00V ~ 0.01V(into 50Ω) 4 amplitude range
|Vac peak| + |Vdc| = 5V
Resolution : 10mV (10.00V ~ 0.01V) |
| Amplitude Accuracy |
<3% ± 5count at 10Hz ~ 1MHz
<10% ± 5count at 1MHz ~ 15MHz |
| Amplitude Unit |
Vpp , Vrms , dBm |
| DC Offset |
-5V ~ 5V (into 50Ω); resolution 10mV |
| DC Offset Accuracy |
<3%±3count at minimum amplitude |
| Duty Control |
80% ~ 20%, ~ 1MHz; resolution 1% |
| Duty Accuracy |
<1% ~ 1MHz at 50% duty |
| Display |
Dual display for frequency 6 digits and amplitude 4 digits |
|
SINE WAVE |
| Distortion |
<0.5%(-46dBc), 10Hz~ 100kHz
<-30dBc, ~15MHz (1Vpp~10Vpp) |
|
TRIANGLE WAVE |
| Linearity Error |
<1% of full scale output at 100Hz |
|
SQUARE WAVE |
| Asymmetry |
±1% of period + 3nS |
| Rise or Fail Time |
<18 nS |
|
SYNC OUTPUT |
| Impedance |
50Ω±10% |
Level
|
>1Vp-p open circuit |
|
MODULATION CHARACTERISTICS |
| Types |
AM, FM, Sweep, Trigger(int/ext), Gate or Burst (implement by trigger type) |
| Waveform |
Sine, Square, Triangle, Ramp or Variable Symmetry Pulse |
| Rate Frequency Range |
10mHz~10kHz in 3 frequency range
(auto switch) |
| Rate Frequency Accuracy |
5% ±1 count |
| Rate Frequency Resolution |
10.0kHz~0.1kHz(100Hz)
99Hz~1Hz(1Hz)
0.99Hz ~ 0.01Hz(0.01Hz) |
| Symmetry |
90% : 10% : 90%; resolution : 1% |
| Symmetry Accuracy |
±1 count(<± 1%) |
| Output Level |
>1Vpp into 10kΩ load |
| Sine Wave Distortion |
<2% from 10Hz ~ 10kHz |
|
AMPLITUDE MODULATION
|
Depth
|
0 ~ 100% |
| Modulation Frequency Rate |
0.01Hz ~ 10kHz(INT) ; DC ~ 1MHz(EXT) |
| Carries -3dB Bandwidth |
<100Hz to >5MHz |
| External Sensitivity |
<10Vpp for 100% modulation |
|
FREQUENCY MODULATION |
| Deviation |
0 ~ ±15% |
Modulation Frequency Rate
|
0.01Hz ~ 10kHz(INT) ; DC ~ 50kHz(EXT) |
| External Sensitivity |
<5Vpp for 15% deviation |
|
SWEEP CHARACTERISTICS |
| Sweep Range |
15MHz ~ 150kHz; 1.5MHz ~ 15kHz;
150kHz ~ 1.5kHz; 15kHz ~ 150Hz;
1.5kHz ~ 15Hz; 150Hz ~ 1.5Hz;
15Hz ~ 0.15Hz; 1.5Hz ~ 0.01Hz |
| Width |
>100:1(in the same frequency range) |
| Rate |
0.01Hz ~ 10kHz |
| Symmetry Control |
90% ~ 10%, resolution:1% |
| Mode |
Linear /Log sweep |
| Sweep Output |
0>-5Vpp into 10kΩ |
|
TRIGGER CHARACTERISTICS |
| Start/Stop Phase Range |
80° ~ 90° |
| Rate |
0.1Hz ~ 10kHz |
| Frequency Range |
0.1Hz ~ 1MHz(Useful ~ 10MHz) |
| Ext Trig Frequency Range |
DC ~ 1MHz, TTL compatible input level |
| Gate or Burst |
Implement by trigger setting |
|
VCF |
| Range |
100:1 (0 ~ 10V ±1V) |
| Input Linearity |
<0.5% ~ 1MHz, <5% ~ 10MHz |
| Input Impedance |
10 kΩ |
|
GCV OUTPUT |
|
0.2V ~ 2V as per different frequencies in the same frequency range |
|
FREQUENCY COUNTER |
INT/EXT
|
Switch selector |
| Range |
5Hz ~ 150MHz EXT |
| Accuracy |
Time base accuracy ±1 count |
| Time Base |
±20ppm(23°C ±5°C) after 30 minutes warm up |
| Resolution |
100nHz for 0.1Hz, 1Hz for 100MHz |
| Input Impedance |
1MΩ // 150pF |
| Sensitivity |
<35mVrms(5 ~ 100MHz), <45mVrms(100MHz~150MHz) |
| MEMORY |
|
| Save/Recall |
10 sets of front panel setting memories |
| INTERFACE |
|
|
RS-232C |
| POWER SOURCE |
|
|
AC115V/230V ±15%, 50/60Hz |
|
ACCESSORIES |
|
User manual x 1
Power cord x 1
Test Lead GTL-101 x 2 |
| DIMENSIONS & WEIGHT |
290(W) x142(H) x 460(D)mm, Approx. 5kg |
