|
KEY FEATURE
Suitable for frequency inverter drivers
Large and bright display for up to 10 values
Scope funtion, 20 setups can be stored
Harmonics 1-99, Bar charts
DC-300kHz, 15mA-40A, 0.3V-1000V
0.1% accuracy
106A Specification
| Voltage |
Ranges, 8 ranges 1-3-10-sequence; 0.3V, 1V, 3V, 10V, 30V, 100V, 300V, 1000V |
- |
| Frequency range |
DC, 0.1Hz-1MHz |
| Crest Factor |
3:1 at 50% full scale (fs) |
| Input Impedance |
>1MΩ |
| Common Mode - 50Hz/100kHz |
160dB/100dB |
Standard accuracy 23°C; rms, mean, rectified mean; 0.3V typical
1Hz-1kHz = ±(0.1% rdg + 0.1% range)
DC, 1kHz-10kHz = ±(0.2% rdg + 0.2% range)
10kHz-100kHz = ±(0.3% range + 0.04%/kHz rdg)
100kHz-300kHz = ±(0.3% range + 0.04%/kHz rdg), typical |
Improved accuracy
±(0.05% rdg + 0.07% range ) |
|
|
| Current |
13 Ranges: 1.5mA, 5mA, 15mA, 50mA, 150mA, 500mA, 1.5A, 5A; 1A, 3A, 10A, 30A, 100A |
Max. 1A, 5A, 30A, resp. |
| Frequency range |
DC, 0.1Hz-300kHz / 1MHz |
| Crest Factor |
3:1 at 50% full scale (fs) |
| Common Mode - 50Hz/100kHz |
160dB/120dB |
Standard accuracy 23°C;
1Hz-1kHz
DC, 1kHz-10kHz
10kHz-100kHz
100kHz-300kHz |
1A-, 5A-, shunt input
±(0.1% rdg + 0.1% range)
±(0.2% rdg + 0.2% range)
±(0.3% rdg + 0.04%/kHz rdg)
±(0.3% rdg + 0.04%/kHz rdg), |
30A input
±(0.1% rdg + 0.1% range)
±(0.7% rdg + 0.2% range)
±(0.3% rdg + 0.5%/kHz rdg), typ.
typical | |
Lowest ranges 1.5mA, 15mA
1A typical.
Improved accuracy 1Hz-400Hz
±(0.05% rdg + 0.07% range) |
|
|
| Power |
104 ranges corresponding to the products V x A |
- |
| Frequency range |
DC, 0.1Hz-300kHz |
Accuracy 23°C ±3°C
45Hz-65Hz ±(0.1% rdg + 0.01% range)
1Hz-1kHz Add accuracy percentage figures of current and voltage
DC, 1kHz-10kHz +0.04%/kHz PF
10kHz-100kHz
|
PF = 0 to ±0.1
PF = 0 to ±1
PF = 0 to ±1
PF = 1 |
|
|
| Frequency |
0.1Hz-400kHz, V triggered; Accuracy ±0.1% |
- |
| Computed Values |
Accuracy; Reactive Power, Var = ±(VA² - W²)½; Apparent Power: VA = Arms Vrms;
Power Factor: PF = W/VA; Crest Factor: CF = Ap/Arms, Vp/Vrms; Form Factor:
FF = At/Arms, Vt/Vrms; Impedance: Z = Vrms/Arms;
Total Harm Dist: THD = (Irms² - IFund²)½/Irms |
Add accuracy percentage
figures of values involved
in computation. |
| Integrator |
Energy, Charge; Accuracy - Wh, VAh, Varh, Ah; Basic accuracy of integrated quantity. |
- |
| Harmonic Analysis |
Frequency range of fundamental - 2.5Hz-100kHz |
- |
| Range of harmonic |
1-99 |
Accuracy, Harmonic current and voltage
2Hz-1kHz = ±(0.1% rdg + 0.1% range)
1kHz-10kHz = ±(0.5% rdg + 0.5% range)
10kHz-100kHz = ±(0.7% range + 0.1%/kHz rdg),typical |
- |
|
|
| Display |
Blue liquid crystal graphic display with FL backlight; - 64x120mm; - 128x240 pixels |
- |
| Power |
AC, 50-400Hz; Fuse: Power |
85V-240V; 2A/15VA |
| Dielectric Strength |
Inputs to case or power supply
Line input to case
Input to Input |
2.5kV/50Hz/1 minute
1.5kV/50Hz/1 minute
4kV/50Hz/1 minute |
| Dimension |
H x W x D; Weight |
150 x 235 x 320mm; 4kg |
| Options |
IEEE-488-2, RS232, Centronics printer output
4 programmable analog outputs, single-, sum-, or average values
4 Analog inputs 0-±5V, input impedance 200kΩ
4 Analog inputs 0-±10V, input impedance 200kΩ
Rack mounting kit
Windows Operating Software (95 - Vista), transformer-motor testing |
0 - ±5V, accuracy 0.2%
0 - ±5V, accuracy 0.2%
0 - ±10V, accuracy 0.2% |
1.5mA-1A Inp
Shunt Input |
Shunt Hi Lo |
1 A input, mA: 1.5, 5, 15, 50, 150, 500, 1500
Shunt input, mV: 60, 60√10, 600, 600√10, 6000, 6000√10
Input impedance: 60kΩ
| |
1 A input: set scaling to 0.1
Shunt input: 60mV = 1.0000A | |
