| 내 용 |
 |
STAG P801 (013-0502-7502 연락바람..)
생산용 4갱 프로그래머 (8비트,32핀 이하 8갱 가능)
스탠드얼론으로 동작하며 PC와 연결 사용도 가능함
초고속 프로그래머로 8/16/32/64 메가 플래시메모리에 적합
본체와 4소켓 모듈 어뎁터 한개를 사용
[특 징]
Very fast programming with high performance pre-checks and post programming checks
Stand Alone or PC remote operation
Easy expansion for package styles up to 56 pin
Modules can be changed quickly and easily
Modules provide reliable contact, no adaptors required
Easy download via RS-232
Optional High Speed IEEE1284 parallel port
[Programming Features]
High Speed programming to manufactures certified specification.
Pre-Program checks are selectable (empty check, bit check, or none).
Verify Margins can be modified from approved algorithms to marginal conditions (+/- 10% deviation from normal).
Security Lock (sector protect) will disable both program and erase operation in any number of available sectors for in-circuit programmable devices.
Device Check for correct insertion and faults.
Bus Isolation for data integrity with 208 drivers built in.
Turbo Charge Modes in addition to the inherent high speed two features are embodied:
1.Skip- where the programmer does not attempt to program empty locations.
2.Memory Mapping - which allows areas of the programmable device not used to be excluded from the program, erase and verify field, thereby increasing throughput proportionally.
[Support]
4 sockets in gang or set and up to eight sockets in gang mode depending on plug in module.
EPROMS, EEPROMS, FLASH, Serial EPROMS, and Microcontrollers.
Package Types DIP and PLCC (no third party adaptors required).
Low Voltage Technologies - all voltages from 2.0V up to 7.0V enabling support of 2.4V and 3.3V technologies.
8, 16 and 32 bit modes.
[Operating Benefits]
User set-up restored on power up.
Low cost of ownership and low cost module configurations.
Memory device data editing tools include:
1.List or Change Data.
2.Insert/delete Bytes.
3.Fill Ram.
4.Block Move.
5.String Search.
Edit functions can be locked out for production use.
[High Speed Data Transfer]
Optional Parallel Interface:
High speed standard IEEE 1284 parallel port giving enhanced bi-directional communication.
Download speed is further enhanced by DMA.
Supplied with StagCom95 and cable.
[Specification]
Device Support
EPROMS, EEPROMS, Serial EPROMS, FLASH and Microcontrollers.
Processor
32 bit Embedded RISC Microcontroller with cache memory.
Memory
4 Mbytes (32Mbits) standard. 16 Mbytes (128Mbytes) expansion using 72 pin SIMMs.
Local interface
Display: 20 x 4 character alphanumeric back-lit LCD.
Keypad: Silicon rubber, tactile 23 keys including dedicated program and cursor buttons.
I/O Port
Serial RS232 port with Baud rate selection 1200, thru 115200. Programmable stop bit. Hardware handshaking protocol.
Data transfer to and from all platforms including PC, VAX, SUN, Macintosh.
I/O format selection includes: ASCII, HEX Space, binary, binary rubout, Intel 32 bit, Motorola S-Record, Stag binary, Stag Hex, Extended TEK-Hex.
Dimensions
440 x 260 x 130mm. (17.2 x 10.4 x 5.2").
Electrical Supply
90-263VAC 40-70Hz 60W.
Environmental
EMC Emissions
Complies with EN 50081-1.
EMC Immunity
Complies with EN 50082-1.
Safety
Complies with EN 60950.
Temperature
Operating: 0-35°C.
STAG P803
[제품 설명]
생산용 8갱 프로그래머
스탠드얼론으로 동작하며 PC와 연결 사용도 가능함
초고속 프로그래머로 8/16/32/64/128 메가 플래시메모리에 적합
본체와 4소켓 모듈 어뎁터 두개를 사용
[특 징]
Support for multiple device types and package styles
3V and 5V device support
Very fast programming with high performance pre-checks and post
programming checks
Stand Alone or PC remote operation
Programs to manufacturers certified algorithms
Modules can be changed quickly and easily
Modules provide reliable contact, no adaptors required
Easy download via RS-232
Optional High Speed IEEE parallel port
[DESCRIPTION]
Stag International has launched the Stag P803, a high performance, high volume production programmer which gives a ten-fold improvement in productivity and production throughput. The programmer is compatible with both 3V and 5V technology devices.
Designed for either standalone or remote operation, the Stag P803 incorporates a powerful 32bit embedded processor to give the fastest programming and verify times. Typically, programming of eight 28F010 Flash devices is achieved in less than four seconds. The P803 is capable of programming eight devices at a time in gang or set mode using twin, plug-in modules each with four sockets. Each socket is backed up with isolated pin drivers for each pin in each socket. The RAM capacity starts at 4 Mbytes (32 Mbits) and is expendable to 16 Mbytes (128 Mbits) using SIMMs, with further expansion planned for the future. Support is provided for a variety of devices including EPROMs, EEPROMs and Flash memory as well as Microcontrollers.
The use of plug-in modules not only ensures that existing packages styles, such as DIPs, PLCCs, PSOP, TSOPs and QFPs, are catered for, but that new package styles can be supported in the future. The device support library is fully updatable and is held in non-volatile Flash memory. New and updated device support software can be simply downloaded from a host computer.
To ensure programming integrity, all parts are checked for correct insertion on power up and programming is undertaken to manufacturers" specifications either by selecting the manufacturer"s part name or using the electronic ID to select the programming algorithm for the device in the socket. Programming can also be security locked, if required in the application. Post-program verification is normally performed to the manufacturer"s specification but can be set to the user limits in order to screen parts more stringently if required.
[SPECIFICATION]
Device Support
EPROM"s, EEPROM"s, FLASH, Serial EEPROM"s, Microcontrollers & PIC"s.
All package types without adaptors - DIP, PLCC, TSOP, PSOP.
Processor
32 Bit Embedded RISC Microcontroller with cache memory.
Memory
4 Mbytes (32 Mbit) expandable up to 16 Mbytes (128 Mbits), using
72 pin SIMMs.
Local Interface
Display: 20 x 4 character, alphanumeric back-lit LCD.
Keypad: Silicon rubber, tactile 23 keys including dedicated program and
cursor buttons.
Ports
Serial port - RS232, with up to 115K2 baud rate.
Parallel port - IEEE1284 new standard parallel interface giving high speed
bi-directional communication.
Data transfer to and from all platforms including PC, VAX, SUN, Macintosh.
All popular I/O Formats are supported including: ASCII hex space, binary,
binary rubout, Intel 16 and 32 bit, Motorola S Record, Stag Binary,
Stag Hex, Tek-Hex, Extended Tek-Hex.
Dimensions
660 x 260 x 130mm. (25.9 x 10.4 x 5.2")
Weight
3.6kg (8lb).
Electrical Supply
90-263VAC 40-70Hz 60W.
Environmental
EMC Emissions
Complies with EN 50081-1.
EMC Immunity
Complies with EN 50082-1.
Safety
Complies with EN 60950.
Temperature
Operating: 0-35°C.
|
